This is a list of devices and protocols known to be supported by QLC+. These have been either tested by developers or reported to be working by users.
If you find any other device or software that works well with QLC+, you are welcome to share the information with the community using the Community forum.
| Device | Plugin name | Type | OS Support | Notes |
|---|---|---|---|---|
| DMXKing USB DMX512-A | DMX USB | Output | ||
| DMXKing ultraDMX MAX | DMX USB | Output | Requires firmware v4.5+ | |
| DMXKing eDMX1 MAX | DMX USB | Output | Requires firmware v4.5+ | |
| DMXKing eDMX4 MAX | DMX USB / Art-Net | Output | Requires firmware v4.5+ | |
| DMXKing ultraDMX micro | DMX USB | Output | Discontinued | |
| DMXKing ultraDMX RDM Pro | DMX USB | Input/Output | Discontinued | |
| DMXKing ultraDMX2 Pro | DMX USB / Art-Net | Input/Output | Discontinued | |
| DMX4ALL StageProfi MK2 | DMX USB | Output | ||
| DMX4ALL Nano DMX | DMX USB | Output | ||
| Enttec Open DMX USB | DMX USB | Output | ||
| Enttec DMX USB Pro | DMX USB | Input/Output | ||
| Enttec DMX USB Pro Mk2 | DMX USB | Input/Output | Discontinued. MIDI support included with a 5-way breakout | |
| Enttec DMXIS | DMX USB | Output | Protocol must be forced to "Pro RX/TX". Must be reset with Pro Manager first |
|
| Eurolite USB-DMX512 | DMX USB | Output | ||
| Eurolite USB DMX512 Pro | DMX USB | Output | ||
| Eurolite USB-DMX512 Pro Cable | DMX USB | Output | Protocol must be forced to "Pro RX/TX" | |
| Eurolite USB DMX512 Pro MK2 | DMX USB | Output | Protocol must be forced to "Pro RX/TX" | |
| Yarilo Mini Open DMX | DMX USB | Output | ||
| Yarilo Open DMX | DMX USB | Output | ||
| Yarilo DMX PRO | DMX USB | Output | Protocol must be forced to "Pro RX/TX" | |
| FTDI USBCOM 485+ | DMX USB | Output | ||
| Gus Electronics USB-VL344 | DMX USB | Output | ||
| Vince DMX512 USB | DMX USB | Output | ||
| ElectroTAS USB-DMX | DMX USB | Output | ||
| DMX4Linux | DMX4Linux | Output | ||
| Enttec Playback Wing | ENTTEC Wing | Input | ||
| Enttec Shortcut Wing | ENTTEC Wing | Input | ||
| USB HID Joystick | HID | Input | ||
| FX5 USB DMX | HID | Input/Output | ||
| Nodle U1 | HID | Input/Output | ||
| Nodle R4S | HID | Input/Output | ||
| OLA | OLA | Output | ||
| Rodin1 | Peperoni | Output | ||
| Rodin2 | Peperoni | Output | ||
| RodinT | Peperoni | Output | ||
| USBDMX21 | Peperoni | Output | Supports 2 output universes | |
| X-Switch | Peperoni | Output | ||
| BitWizard DMX interface | UART | Output | Raspberry Pi only | |
| DiscoHAT | UART, SPI, GPIO | Input/Output | Raspberry Pi only | |
| Anyma uDMX | uDMX | Output | See this forum post | |
| AVLdiy.cn Anyma clone | uDMX | Output | ||
| Velleman K8062D | Velleman | Output | Proprietary DLL needed Warning: Read this first |
| Device | Protocol | Type | OS Support | Notes |
|---|---|---|---|---|
| DMXking eDMX2 PRO | Art-Net | Input/Output | Configuration Tool (Windows) | |
| Enttec ODE | Art-Net | Input/Output | Node Management Utility (Windows/OSX) | |
| IranDMX Phoenix | Art-Net | Output | Output IP must be set to 2.0.0.1 | |
| DMX4ALL Art-Net-DMX STAGE-PROFI 1.1 |
Art-Net | Input/Output | DMX Configurator (Windows) IP Configurator (Windows) |
|
| YARILO LanDMX4 | Art-Net | Input/Output | ||
| Art-Net Software Nodes | Art-Net | Input/Output | Tested with Art-Net Controller LITE Modul8 MadMapper |
|
| E1.31 | E1.31 | Input/Output | Tested with DMXking eDMX2 PRO | |
| OSC | OSC | Input/Output Feedback |
Tested with: TouchOSC Lemur Pure Data |
|
| Behringer BCF2000 | MIDI | Input/Output Feedback |
With motorized faders! | |
| Korg MIDI controllers | MIDI | Input/Output Feedback |
||
| Novation Launchpads | MIDI | Input/Output Feedback |
||
| Akai APC controllers | MIDI | Input/Output Feedback |
||
| PMJ Controllers | MIDI | Input/Output Feedback |
||
| Elation MIDIcon | MIDI | Input/Output Feedback |
||
| M-Audio Keystation 88 | MIDI | Input/Output Feedback |